Audio Bags |
||
|
The Audio Strap from camRade fits the audioMaster and audioMate cases. |
|
| Product Detail | ||
Audio Bags |
||
|
The audioBag protects each specific mixer model in a specially tailored case. The vinyl window enables the user to read the meters. |
|
| Product Detail | ||
Audio Bags |
||||
|
The audioBag protects each specific mixer model in a specially tailored case. The vinyl window enables the user to read the meters.
ABSD 01 carries: SD302 and other small mixers
|
|||
| Product Detail | ||||
Audio Bags |
||||
|
The audioBag protects each specific mixer model in a specially tailored case. The vinyl window enables the user to read the meters.
Weight: 0,9 Kg/ 2 lb Battery storage below audio compartment, fixed HF-outside pocket. ABSD 02 carries : SD 302-style mixer with small recorder/and other small mixers.
|
|||
| Product Detail | ||||
Audio Bags |
||||
|
The camRade audioMaster is a 1000 denier Cordura nylon bag designed to carry and protect many audio mixers or recorders. It has a padded foam interior with reinforced plastic sided. The bag has 3 pockets for accessories. Main compartment holds the audio mixer or recorder and there are ports between the compartments to pass the cable through. There are clear vinyl covers with a touch fastener on top of the bag that protects the equipment, while allowing view of the controls. The bag is carried by a removable, adjustable schoulder strap or an optional audio harness. There are rings on top for the shoulder strap or harness and rings on the bottom to fix the harness-belt.
Weight: 1,2 Kg/ 2,6 lb 1 large outside-pocket for headphones and cables, 2 pockets for HF-units and battery. AMAS carries: SD442, SD744, SD552, AD-261, SQN 4/5, CS104 |
|||
| Product Detail | ||||
Transport Bags |
||||
|
camRade Cabin Bag is a lightweight, slim bag designed to carry a professional broadcast video camera, batteries, charger and accessories. It can be stored in the overhead compartment of an airline. The bag is made from 100% water-resistant 1000 denier Cordura nylon with an interior that is reinforced with tough PVC plates on each side to protect the gear from rough beatings. It also has a fully padded interior. It is carried by a suede covered hand strap or a removable shoulder strap with pad.
Weight: 2,85 Kg/ 6,3 lb |
|||
| Product Detail | ||||
Camera Bags |
||||
|
With the CB-575 carrying bag we produced a compact, soft, padded and lightweight camera bag, especially designed for quick-draw camera access. The CB-575 will fit a professional camcorder up to 22.6'' and accessories. Further it's equipped with two zippered pocket and one mesh pocket that can hold your tickets and maps .
The CB-575 is equipped with two kinds of carrying options. A comfortable over the shoulder adjustable carrying strap with a suede pad and a suede hand grip. The outside of the bag is made of the highest quality available namely waterresistant 1000 denier Cordura. The CB-575 also has a PVC insert that makes the bag more rigidly. By using the PVC inlay the camRade bag has a much longer life span than most of our competitors. The bottom of the bag is equipped with a protective armored plastic plate and on the outside you will find a non-slip cover, designed for protecting your camera even when you are placing it on the ground.
Weight: 2,85 Kg/ 6.3 lb Including: Removable and adjustable schoulderstrap, White Balance Card |
|||
| Product Detail | ||||
Camera Bags |
||||
|
The camBag is a compact, soft padded and lightweight camera bag.
Weight: 3,3 Kg/ 7.3 lb Including: Removable and adjustable schoulderstrap, White Balance Card |
|||
| Product Detail | ||||
Camera Bags |
||||
|
The camBag is a compact, soft padded and lightweight camera bag.
CB-750 fits Sony PDW-700 and Sony PDW-F800 cameras w/ lenses
Weight: 3,5 Kg/ 7.72 lb Including: Removable and adjustable schoulderstrap, White Balance Card |
|||
| Product Detail | ||||
Camera Bags |
||
|
CamBag Combo securely holds most of the new videocameras like Sony EX1, F3, RED Epic, Canon C300 etc. |
|
| Product Detail | ||
Camera Bags |
||||
|
The CB HD Large will fit a professional camcorder up to 29,5'' and accessories. Further it's equipped with an outside flat mesh pocket,three adjustable inside pockets and two mesh pockets inside the lid and plastic reinforced sidethat are resistant against even the most extreme conditions. The CB HD Lagre is equipped with two kinds of carrying options. A comfortable over the shoulder adjustable carrying strap with a suede pad and a suede hand grip. The outside of the bag is made of the highest quality available namely waterresistant 1000 denier Cordura. The CB HD Large also has a PVC insert that makes the bag more rigidly. By using the PVC inlay the camRade bag has a much longer life span than most of our competitors. The bottom of the bag is equipped with a protective armored plastic plate and on the outside you will find a non-slip cover, designed for protecting your camera even when you are placing it on the ground.
Weight: 3,9 Kg/ 8,6 lb
Including: removable and adjustable schoulderstrap and White Balance Card |
|||
| Product Detail | ||||
Camera Bags |
||
|
With the CB HD Small carrying bag we produced a compact, soft, padded and lightweight camera bag, especially designed for quick-draw camera access. The CB HD Small will fit a professional camcorder up to 19,7'' and accessories. Further it's equipped with an outside flat mesh pocket and various adjustable inside pockets. The CB HD Small is equipped with two kinds of carrying options. A comfortable over the shoulder adjustable carrying strap with a suede pad and a suede hand grip. The outside of the bag is made of the highest quality available namely waterresistant 1000 denier Cordura. The CB HD Small also has a PVC insert that makes the bag more rigidly. By using the PVC inlay the camRade bag has a much longer life span than most of our competitors. The bottom of the bag is equipped with a protective armored plastic plate and on the outside you will find a non-slip cover, designed for protecting your camera even when you are placing it on the ground.
Internal dimensions Length (mm) : 500 Length (inch) : 19,7 External dimensions Length (mm) : 540 Length (inch) : 21,3 Weight: 2,5 Kg/ 5,5 lb
What is included: Removable and adjustable schoulderstrap, White Balance Card |
|
| Product Detail | ||
Camera Bags |
||||||
|
The camBag is a compact, soft padded and lightweight camera bag.
|
|||||
| Product Detail | ||||||
Camera Bags |
||||
|
The camBag is a compact, soft padded and lightweight camera bag.
Weight: 2,9 Kg/ 6,4 lb Including: Removable and adjustable schoulderstrap, White Balance Card |
|||
| Product Detail | ||||
Camera Bags |
||||
|
CB Single Small designed for quick-draw camera access. The CB Single Small will fit a professional camcorder up to 16,5'' and accessories. Further it's equipped with one zippered pocket and one mesh pocket that can hold your tickets and maps. The CB Single Small is equipped with two kinds of carrying options. A comfortable over the shoulder adjustable carrying strap with a suede pad and a suede hand grip. The outside of the bag is made of the highest quality available namely waterresistant 1000 denier Cordura. The CB Single Small also has a PVC insert that makes the bag more rigidly. By using the PVC inlay the camRade bag has a much longer life span than most of our competitors. The bottom of the bag is equipped with a protective armored plastic plate and on the outside you will find a non-slip cover, designed for protecting your camera even when you are placing it on the ground.
Weight: 2,9 Kg/ 6,4 lb
What is included: Removable and adjustable schoulderstrap, White Balance Card |
|||
| Product Detail | ||||
Desert Suits |
||
|
The desertSuit is the latest feature in camera covers. This suit protects your camera from dust and water, it is made of the same noiseless material as the wetSuit and because the cover is manufactured in a white reflecting material, it minimizes the heating effect of the sun. |
|
| Product Detail | ||
Lighting Bags |
||
|
The lightBag transports your lighting kit with maximum ease and gives your equipment that extra protection needed. Dimmension: 950 x 290 x 200 mm (37,5 x 11,4 x 7,9 inch) |
|
| Product Detail | ||
Lighting Bags |
||
|
The lightBag transports your lighting kit with maximum ease and gives your equipment that extra protection needed. Dimmension: 950 x 290 x 200 mm (37,5 x 11,4 x 7,9 inch) |
|
| Product Detail | ||
Lighting Bags |
||
|
The Litepanel lightBag transports two 1x1 Litepanels with maximum ease and gives your equipment that extra protection needed. Dimmension: 350 x 105 x 390 mm (13,8 x 4,1 x 15,4 inch) |
|
| Product Detail | ||
Monitor Bags |
||
|
The monitorGuard provides everyday protection for portable field monitors. Including a two level fold-up stand to give a better viewing angle and stable position. |
|
| Product Detail | ||
Monitor Bags |
||
|
The monitorGuard provides everyday protection for portable field monitors. Including a two level fold-up stand to give a better viewing angle and stable position.
Fits: Sony LMD 9050 |
|
| Product Detail | ||
Monitor Bags |
||
|
The monitorGuard provides everyday protection for portable field monitors. Including a two level fold-up stand to give a better viewing angle and stable position. |
|
| Product Detail | ||
Snow Coats |
||
|
This highly insulated, thermal camera jacket keeps your camera, batteries, lens and hands warm at extremely low temperatures. Built-in heat packs help to maintain the high internal temperature for more than 6 hours. |
|
| Product Detail | ||
Snow Coats |
||
|
This highly insulated, thermal camera jacket keeps your camera, batteries, lens and hands warm at extremely low temperatures. Built-in heat packs help to maintain the high internal temperature for more than 6 hours. |
|
| Product Detail | ||
Snow Coats |
||
|
This highly insulated, thermal camera jacket keeps your camera, batteries, lens and hands warm at extremely low temperatures. Built-in heat packs help to maintain the high internal temperature for more than 6 hours. |
|
| Product Detail | ||
Snow Coats |
||
|
This highly insulated, thermal camera jacket keeps your camera, batteries, lens and hands warm at extremely low temperatures. Built-in heat packs help to maintain the high internal temperature for more than 6 hours. |
|
| Product Detail | ||
Transport Bags |
||||
|
This comfortable accessory bag gives the cameraman, sound engineer, and any other video professional room for more accessories and personal belongings. Bag is including dividers.
Weight: 2,5 Kg/ 5,5 lb |
|||
| Product Detail | ||||
Transport Bags |
||||
|
This comfortable accessory bag gives the cameraman, sound engineer, and any other video professional room for more accessories and personal belongings. Bag is including dividers.
Weight: 7,3 Kg/ 8,1 lb |
|||
| Product Detail | ||||
Backpacks |
||||
|
The camRade TM-575 travelMate is a 1000 denier Cordura backpack with a 2,0" foam padded interior. It is designed to carry a camcorder up to 22,6" in a cushioned, protected area. It has a re-inforced viewfinder section that protects it from damage an adjustable strap that holds the camcorder in place. Further it's equiped with two exterior touch fastener pockets, three exterior zippered pockets and an interior touch fastener flat net-pocket. The TM-575 is configured so that the weight is evenly distributed across the schoulders and hips. It is carried by a strap handle on top, two carry straps on the side with an overlapping grip and an adjustable backpack system. The TM-575 also has a PVC insert that makes the bag more rigidly. By using the PVC inlay the camRade bag has a much longer life span than most of our competitors.
|
|||
| Product Detail | ||||
Backpacks |
||
|
camRade’s TM outBag Hiker Backpack features a level of protection you haven't seen before; camRade’s PVC protection safeguards the camera compartment and the bottom of the case while keeping it light. The extensive main compartment easily accommodates 2-3 DSLR bodies with up to 6 lenses (up to 400 mm f 2.8) or a DV or HDV camcorder. The case is set up with modular dividers. The TM outBag advanced harness system is designed to allow for ultimate adjustment of all features; shoulder straps, 6 point adjustable waist belt, and lumbar pad, ensuring the perfect ergonomic fit for each individual carrier. Specifications: * Can hold a laptop up till 17".
|
|
| Product Detail | ||
Tripod Bags |
||
|
TripodBag I |
|
| Product Detail | ||
Tripod Bags |
||
|
TripodBag II
A carefully designed bag to carry your tripod in the most convenient way. Following feedback from existing camRade users the bag has been designed to be square, which in addition to providing maximum protection, reduces the risk of the bag rolling off trolleys or conveyor belts. The tripodBag is made of high quality materials, which conforms to the high quality standards, associated with all camRade products. Internal dimensions Length (mm) : 1050 Width (mm) : 240 Height (mm) : 250 Length (inch) : 41,5 Width (inch) : 9,5 Height (inch) : 9,8 External dimensions Length (mm) : 1080 Width (mm) : 270 Height (mm) : 280 Length (inch) : 42,5 Width (inch) : 10,6 Height (inch) : 11 Weight: 4 Kg/ 8,8 lb |
|
| Product Detail | ||
Rain Covers |
||
|
WetSuits for Canon XF100/105. Easy to carry with you and around the camera with maximum protection to protect against rain or dust. Weight: 0.30 Kg/ 0.66 lb |
|
| Product Detail | ||
Rain Covers |
||
|
WetSuits for Canon XF300/305. Easy to carry with you and around the camera with maximum protection to protect against rain or dust. Weight: 0.30 Kg/ 0.66 lb |
|
| Product Detail | ||
Rain Covers |
||
|
The CamRade WS AG-HPX250 / AG-AC130 / AG-160 wetsuit is a soft flexible, waterproof PVC cover that can be used around a camcorder with complete access to the controls, zoom and LCD monitor screen.
The CamRade WS AG-HPX250 / AG-AC130 / AG-160 wetsuit has a noiseless cotton interior fabric that reduces noise from wind and rain. The cover has vinyl windows to view the controls. It has elastic and zipper closures and is packed in a zippered pocket.
|
|
| Product Detail | ||
Rain Covers |
||
|
The wetSuit for OB use have been made of grey soft Nylon-pvc. Transparent parts are mounted there where needed, the cover closes with zippers. The installation can be done without interrupting the shoot. Weight: 2 Kg / 4,4 lb Fits camera configuration: camera/ 5 or 7" VF/ ENG-lens |
|
| Product Detail | ||
Rain Covers |
||
|
The camRade WS HMC151/HPX171 wetSuit (Black) is a soft flexible,waterproof PVC cover that can be used around a camcorder with complete access to the controls, zoom and LCD monitor screen. The noiseless cotton interior fabric reduces noise from wind and rain. The cover has vinyl windows to view the controls.It has elastic and zipper closures and is packed in a zippered pocket.
Weight: 0.35 Kg/ 0.77 lb |
|
| Product Detail | ||
Rain Covers |
||
|
The CamRade WS NEX-FS100 wetsuit is a soft flexible, waterproof PVC cover that can be used around a camcorder with complete access to the controls, zoom and LCD monitor screen.This rain cover is especially designed to fit the Sony NEX-FS100 camcorder.
The CamRade WS NEX-FS100 wetsuit's noiseless cotton interior fabric reduces noise from wind and rain. The cover has vinyl windows to view the controls.It has elastic and zipper closures and is packed in a zippered pocket.
|
|
| Product Detail | ||
Rain Covers |
||
|
The CamRade WS NEX-FS700 wetsuit (Black) is a soft flexible, waterproof PVC cover that can be used around a camcorder with complete access to the controls, zoom and LCD monitor screen. This rain cover is especially designed to fit the Sony NEX-FS700 camcorder.
The CamRade WS NEX-FS700 wetsuit's noiseless cotton interior fabric reduces noise from wind and rain. The cover has vinyl windows to view the controls.It has elastic and zipper closures and is packed in a zippered pocket. |
|
| Product Detail | ||
Rain Covers |
||
|
The camRade WS PMW 200 wetsuit (Black) is a soft flexible, waterproof PVC cover that can be used around a camcorder with complete access to the controls, zoom and LCD monitor screen. It is especially designed to fit the Sony PMW 200.
The camRade WS PMW 200 wetsuit has a noiseless cotton interior fabric reduces noise from wind and rain. The cover has vinyl windows to view the controls.It has elastic and zipper closures and is packed in a zippered pocket.
|
|
| Product Detail | ||
Rain Covers |
||
|
The CamRade WS HVR Z1/Z5/FX1 wetsuit (Black) is a soft flexible, waterproof PVC cover that can be used around a camcorder with complete access to the controls, zoom and LCD monitor screen.This rain cover is especially designed to fit the Sony HVR Z1/Z5/FX1 camcorders.
The CamRade WS HVR Z1/Z5/FX1 wetsuit (Black) is a soft flexible, waterproof PVC cover that can be used around a camcorder with complete access to the controls, zoom and LCD monitor screen.The noiseless cotton interior fabric reduces noise from wind and rain. The cover has vinyl windows to view the controls.It has elastic and zipper closures and is packed in a zippered pocket.
|
|
| Product Detail | ||
Rain Covers |
||
|
Windproof and waterproof cover for mini-DV cameras made of flexible, soft material, complete with vinyl windows. |
|
| Product Detail | ||
Rain Covers |
||
|
Windproof and waterproof cover for mini-DV cameras made of flexible, soft material, complete with vinyl windows. |
|
| Product Detail | ||
Rain Covers |
||
|
The camRade DSLR wetSuit is a soft flexible,waterproof PVC cover that can be used around a camera with complete access to the controls, zoom and LCD monitor screen. The noiseless cotton interior fabric reduces noise from wind and rain. The cover has vinyl windows to view the controls.It has elastic closures and is packed in a zippered pocket. |
|
| Product Detail | ||
Rain Covers |
||
|
The camRade WS XL I/II/H1 wetSuit (Black) is a soft flexible,waterproof PVC cover that can be used around a camcorder with complete access to the controls, zoom and LCD monitor screen. The noiseless cotton interior fabric reduces noise from wind and rain. The cover has vinyl windows to view the controls.It has elastic and zipper closures and is packed in a zippered pocket. Weight: 0.30 Kg/ 0.66 lb |
|
| Product Detail | ||
Rain Covers |
||
|
Windproof and waterproof cover for mini-DV cameras made of flexible, soft material, complete with vinyl windows.
Fits: Panasonic AG-AF100 |
|
| Product Detail | ||
Rain Covers |
||
|
Windproof and waterproof cover for mini-DV cameras made of flexible, soft material, complete with vinyl windows. |
|
| Product Detail | ||
Rain Covers |
||
|
Windproof and waterproof cover for HD cameras made of flexible, soft material, complete with vinyl windows. |
|
| Product Detail | ||
Rain Covers |
||
|
Windproof and waterproof cover for mini-DV cameras made of flexible, soft material, complete with vinyl windows. |
|
| Product Detail | ||
Rain Covers |
||
|
Windproof and waterproof cover for mini-DV cameras made of flexible, soft material, complete with vinyl windows.
Fits: Sony PMW-EX1 Sony HVR-Z7E |
|
| Product Detail | ||
Rain Covers |
||
|
Windproof and waterproof cover for mini-DV cameras made of flexible, soft material, complete with vinyl windows. |
|
| Product Detail | ||
Rain Covers |
||
|
Windproof and waterproof cover for mini-DV cameras made of flexible, soft material, complete with vinyl windows. |
|
| Product Detail | ||
Rain Covers |
||
|
Windproof and waterproof cover for mini-DV cameras made of flexible, soft material, complete with vinyl windows. |
|
| Product Detail | ||
Rain Covers |
||
|
Windproof and waterproof cover for shoulder mount cameras made of flexible, soft material, complete with vinyl windows.
Fits: Sony and Panasonic shoulder cameras. |
|
| Product Detail | ||